© 2019 LAR100x 

LAR Technologies

info@lar100.com

+7 (812) 409-93-90

Sales office

Komsomola st., 1-3АR

Saint-Petersburg

Russia, 195009

Manufacturing facility, R&D

Komsomola st., 1-3АR

Saint-Petersburg

Russia, 195009

Быстрый выпуск сложных деталей
Printed samples are available on demand.

от €69,900.-

ПЕРВЫЙ ПО НАСТОЯЩЕМУ ДОСТУПНЫЙ ПРИНТЕР ПО МЕТАЛЛУ

LAR100 делает печать металлом доступной для широкого круга потребителей.

Печать металлом еще никогда не была такой дешевой.

Металлические детали теперь доступны всем. 

Лимитированное предложение LAR100 от €69,900.

200W IPG Photonics laser

Лазер это сердце принтера.

В базовой версии поставляется лазер 200 watt IPG Photonics.

IPG это лучший в мире производитель источников лазерного излучения.

 

Двухстороннее нанесение порошка 

Нанесение слоев порошка занимает 30-70%времени печати, в зависимости от топологии детали.

Двухсторонняя система нанесения порошка сокращает это время до 2 раз, таким образом скорость печати увеличится на 50%.

€4,900.-

 

Система машинного зрения

Machine vision system prevents defects in the printed part. In case any problems with coating are detected the system firstly tries to recoat the  surface, and set to pause or stop in case the problem can not be resolved automatically, operator is called to fix the problem manually.

€2,500.-

Powder recycling system 

Automatic powder recycling system. Unused powder is automatically picked up and put into the cartridge. The powder is sifted, cleaned and preheated automatically. This option will save 30% of the printing time spend on refilling the cartridges and preparing the printer to work. 

€12,500.-

Small portion adapter

Small portion adapter reduces powder cycling. It helps to save powder clean and fresh while printing small parts.

€5,200.-

Spare build platform kit

A kit of 5 spare build platforms. Several platforms could be put inside printing chamber to save inert gas and the time for refiling the chamber with new atmosphere. This reduces printing costs and increases printing speed.

€800.-

Variety of laser sources

Up to 1kW laser source will increase the scanning rate. This is especially important for titanium alloys and bold models. Thus higher laser power can increase printing speed by 30-200%.

from €15,000.-

 

Stainless steel part.

Printing time 4 hours.

Stainless steel part for medical purposes. Printing time 3 hours.

Test cubes made of stainless steel.

Printing time 40 minutes.

Stainless steel part.

Printing time 4 hours.

Stainless steel part after surface machining.

Stainless steel test cubes.

Printing time 40 minutes.

Stainless steel hollow part.

Printing time 4 hours.

Test part with builtin cooling channels. 

Printing time 6 hours.

Stainless steel waveguide.

Printing time 1.8 hours.